AD676JN vs AD676KN Vergleich
Detaillierter Direktvergleich von AD676JN von Analog Devices und AD676KN von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
AD676JN - 16-Bit 100kSPS Parallel SAR ADC | Analog Devices
AD676JN ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | AD676JN | AD676KN |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Aktiv |
| Number of Bits | 16 | — |
| Abtastrate | 100 kSPS | 100 kSPS |
| Conversion Time | 10 us | — |
| Architecture | SAR (Successive Approximation Register) | — |
| Input Channels | 1 single-ended | — |
| Data Interface | Parallel (16-bit) | — |
| Input Type | Single-Ended, unipolar or bipolar (pin-strapped) | — |
| Integral Nonlinearity (INL) | 1 LSB max (no missing codes) | — |
| Total Harmonic Distortion (THD) | -97 dB | — |
| Signal-to-Noise Ratio (SNR) | 90 dB | — |
| Gehäuse | 28-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm) | 28-pin plastic DIP (28-PDIP) |
| Betriebstemperatur | 0 C to +70 C | 0 °C to +70 °C |
| Montageart | Through-Hole (DIP) | Through-hole |
| Packaging | Tube | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Autocalibration | On-chip, automatic on power-up and on CAL command | Yes |
| Sample-and-Hold | On-chip | — |
| Auflösung | — | 16 bit |
| Input Count | — | 1 input |
| Conversion Architecture | — | Successive approximation (SAR) |
| Internal Architecture | — | Switched-capacitor charge redistribution |
| Total Conversion Time | — | 10 µs |
| Output Interface | — | 16-bit parallel output |
| Package Body Width | — | 0.600 in (15.24 mm) |
| Temperature Grade | — | Commercial |
| Sample-and-Hold Function | — | On-chip |
| Missing Codes | — | No missing codes |
| Full-Power Bandwidth | — | 1 MHz |
| Signal-to-Noise Plus Distortion | — | 90 dB |
| Total Harmonic Distortion | — | 97 dB |
| Integral Nonlinearity | — | 1 LSB |
| Analog Supply | — | +15 V |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |