AD676JN vs AD676KN مقایسه
مقایسه دقیق کنار به کنار AD676JN توسط Analog Devices و AD676KN توسط Analog Devices. مشخصات کلیدی، پارامترهای الکتریکی، بستهبندی، وضعیت چرخه عمر، قیمتگذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | AD676JN | AD676KN |
|---|---|---|
| برند | Analog Devices | Analog Devices |
| دستهبندی | ADC/DAC | ADC/DAC |
| وضعیت چرخه عمر | آخرین فرصت خرید | فعال |
| Number of Bits | 16 | — |
| نرخ نمونهبرداری | 100 kSPS | 100 kSPS |
| Conversion Time | 10 us | — |
| Architecture | SAR (Successive Approximation Register) | — |
| Input Channels | 1 single-ended | — |
| Data Interface | Parallel (16-bit) | — |
| Input Type | Single-Ended, unipolar or bipolar (pin-strapped) | — |
| Integral Nonlinearity (INL) | 1 LSB max (no missing codes) | — |
| Total Harmonic Distortion (THD) | -97 dB | — |
| Signal-to-Noise Ratio (SNR) | 90 dB | — |
| بستهبندی | 28-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm) | 28-pin plastic DIP (28-PDIP) |
| دمای کاری | 0 C to +70 C | 0 °C to +70 °C |
| نوع نصب | Through-Hole (DIP) | Through-hole |
| Packaging | Tube | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Autocalibration | On-chip, automatic on power-up and on CAL command | Yes |
| Sample-and-Hold | On-chip | — |
| رزولوشن | — | 16 bit |
| Input Count | — | 1 input |
| Conversion Architecture | — | Successive approximation (SAR) |
| Internal Architecture | — | Switched-capacitor charge redistribution |
| Total Conversion Time | — | 10 µs |
| Output Interface | — | 16-bit parallel output |
| Package Body Width | — | 0.600 in (15.24 mm) |
| Temperature Grade | — | Commercial |
| Sample-and-Hold Function | — | On-chip |
| Missing Codes | — | No missing codes |
| Full-Power Bandwidth | — | 1 MHz |
| Signal-to-Noise Plus Distortion | — | 90 dB |
| Total Harmonic Distortion | — | 97 dB |
| Integral Nonlinearity | — | 1 LSB |
| Analog Supply | — | +15 V |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |