AD713JN vs OPA404KP Vergleich
Detaillierter Direktvergleich von AD713JN von Analog Devices und OPA404KP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | AD713JN | OPA404KP |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Quad precision operational amplifier | Quad High-Speed Precision Difet Operational Amplifier |
| Topologie | Four AD711 BiFET amplifiers on a monolithic die | — |
| Number of Amplifiers | 4 channels | — |
| Gain-Bandwidth Product | 9 MHz | — |
| Slew Rate | 10 V/µs | 35 V/us |
| Settling Time | Approximately 1 µs to 0.01% | — |
| Input Offset Voltage | 0.3 mV typical | — |
| Input Bias Current | 0.5 pA typical | — |
| Input Voltage Noise | 7 nV/√Hz | — |
| Open-Loop Gain | 100 dB typical | — |
| Maximum Total Supply Voltage | 36 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Power Supply Rejection Ratio | 100 dB typical | — |
| Betriebstemperaturbereich | 0°C to +70°C | — |
| Gehäuse | 14-lead plastic DIP | 14-PDIP |
| Montageart | Through-hole | Through Hole |
| Lead-Free Status | unknown | — |
| RoHS Compliance | unknown | — |
| Number of Circuits | — | 4 |
| Gain Bandwidth Product | — | 6.4 MHz |
| Input Offset Voltage (max) | — | +/-750 uV |
| Input Bias Current (max) | — | +/-4 pA |
| Settling to 0.01% | — | 0.01% settling spec (datasheet value) |
| Total Supply Voltage (min) | — | 10 V |
| Total Supply Voltage (max) | — | 36 V |
| Supply Type | — | Dual or single supply |
| Input Type | — | Difet (FET input, cascode) |
| Pin Configuration | — | Standard quad op amp pinout |
| Manufacturer Series | — | OPA404 |
| Product Status | — | Active |