AD713JN vs OPA404KP Comparación
Comparación detallada lado a lado de AD713JN por Analog Devices y OPA404KP por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | AD713JN | OPA404KP |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Quad precision operational amplifier | Quad High-Speed Precision Difet Operational Amplifier |
| Topología | Four AD711 BiFET amplifiers on a monolithic die | — |
| Number of Amplifiers | 4 channels | — |
| Gain-Bandwidth Product | 9 MHz | — |
| Slew Rate | 10 V/µs | 35 V/us |
| Settling Time | Approximately 1 µs to 0.01% | — |
| Input Offset Voltage | 0.3 mV typical | — |
| Input Bias Current | 0.5 pA typical | — |
| Input Voltage Noise | 7 nV/√Hz | — |
| Open-Loop Gain | 100 dB typical | — |
| Maximum Total Supply Voltage | 36 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Power Supply Rejection Ratio | 100 dB typical | — |
| Rango de temperatura de funcionamiento | 0°C to +70°C | — |
| Encapsulado | 14-lead plastic DIP | 14-PDIP |
| Tipo de montaje | Through-hole | Through Hole |
| Lead-Free Status | unknown | — |
| RoHS Compliance | unknown | — |
| Number of Circuits | — | 4 |
| Gain Bandwidth Product | — | 6.4 MHz |
| Input Offset Voltage (max) | — | +/-750 uV |
| Input Bias Current (max) | — | +/-4 pA |
| Settling to 0.01% | — | 0.01% settling spec (datasheet value) |
| Total Supply Voltage (min) | — | 10 V |
| Total Supply Voltage (max) | — | 36 V |
| Supply Type | — | Dual or single supply |
| Input Type | — | Difet (FET input, cascode) |
| Pin Configuration | — | Standard quad op amp pinout |
| Manufacturer Series | — | OPA404 |
| Product Status | — | Active |