ADC0804LCN vs ADC0804LCJ Vergleich
Detaillierter Direktvergleich von ADC0804LCN von Texas Instruments und ADC0804LCJ von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ADC0804LCJ - 8-Bit µP-Compatible SAR ADC, 20-DIP | Texas Instruments
ADC0804LCJ ✓ AktivSpezifikationsvergleich
| Parameter | ADC0804LCN | ADC0804LCJ |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,84 | $5,80 |
| Auflösung | 8 bit | 8 bits |
| Number of Channels | 1 | — |
| Input Type | Differential (single-ended capable) | — |
| Converter Architecture | SAR (Successive Approximation) | — |
| Analog Supply Voltage | 4.5 V to 6.5 V (single +5 V typical) | — |
| Digital Supply Voltage | Same as VCC (no separate DVCC) | — |
| Full-Scale Input Range | 0 V to 5 V (with VREF/2 = 2.5 V) | — |
| Reference Input | VREF/2 pin, sets full-scale span | — |
| INL (Integrale Nichtlinearität) | ±1 LSB (max) | — |
| DNL (Differential Nonlinearity) | ±1 LSB (max) | — |
| Conversion Time | 110 µs typical at fCLK = 640 kHz | — |
| Conversion Rate | Up to ~10 kSPS (typical application clock) | — |
| Supply Current (ICC) | 1.9 mA typ at 25 °C, CS=5V (LCN/LCWM) | — |
| Digital Interface | Three-state parallel bus, RD/WR strobes, CS | — |
| On-Chip Clock Generator | Yes (external R or R + C) | — |
| Betriebstemperatur | -40 °C to +85 °C | -40C to +85C |
| Gehäuse | 20-pin PDIP (N) | — |
| Montageart | Through-hole | Through-Hole (DIP) |
| MSL-Level | [DATA_NEEDED: MSL level] | N/A (through-hole) |
| RoHS-Status | [DATA_NEEDED: RoHS status of LCN variant] | [DATA_NEEDED: check datasheet] |
| Architecture | — | SAR (Successive Approximation) |
| Sampling Rate (Max) | — | 10 kSPS |
| Number of Inputs | — | 1 single-ended (pseudo-differential) |
| Eingangsspannungsbereich | — | 0 V to 5 V or +/-5 V with +/-5 V supplies |
| Data Interface | — | Parallel (µP-compatible) |
| Ausgangstyp | — | Tri-state, 8-bit parallel |
| Supply Voltage (VCC) | — | 4.5 V to 6.3 V (typ. 5 V) |
| Supply Current (typ.) | — | [DATA_NEEDED: quiescent ICC] |
| Gehäuse / Bauform | — | 20-CDIP (0.300 inch, 7.62mm) |
| Conversion Method | — | Successive Approximation with differential potentiometric ladder |
| Reference Type | — | External (REF/2 input) |