ADC0804LCN vs ADC0804LCJ 比較
詳細な並列比較: ADC0804LCN メーカー: Texas Instruments および ADC0804LCJ メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
ADC0804LCJ - 8-Bit µP-Compatible SAR ADC, 20-DIP | Texas Instruments
ADC0804LCJ ✓ 生産中仕様比較
| パラメータ | ADC0804LCN | ADC0804LCJ |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $3.84 | $5.80 |
| 分解能 | 8 bit | 8 bits |
| Number of Channels | 1 | — |
| Input Type | Differential (single-ended capable) | — |
| Converter Architecture | SAR (Successive Approximation) | — |
| Analog Supply Voltage | 4.5 V to 6.5 V (single +5 V typical) | — |
| Digital Supply Voltage | Same as VCC (no separate DVCC) | — |
| Full-Scale Input Range | 0 V to 5 V (with VREF/2 = 2.5 V) | — |
| Reference Input | VREF/2 pin, sets full-scale span | — |
| INL（積分非直線性） | ±1 LSB (max) | — |
| DNL (Differential Nonlinearity) | ±1 LSB (max) | — |
| Conversion Time | 110 µs typical at fCLK = 640 kHz | — |
| Conversion Rate | Up to ~10 kSPS (typical application clock) | — |
| Supply Current (ICC) | 1.9 mA typ at 25 °C, CS=5V (LCN/LCWM) | — |
| Digital Interface | Three-state parallel bus, RD/WR strobes, CS | — |
| On-Chip Clock Generator | Yes (external R or R + C) | — |
| 動作温度 | -40 °C to +85 °C | -40C to +85C |
| パッケージ | 20-pin PDIP (N) | — |
| 実装タイプ | Through-hole | Through-Hole (DIP) |
| MSLレベル | [DATA_NEEDED: MSL level] | N/A (through-hole) |
| RoHS ステータス | [DATA_NEEDED: RoHS status of LCN variant] | [DATA_NEEDED: check datasheet] |
| Architecture | — | SAR (Successive Approximation) |
| Sampling Rate (Max) | — | 10 kSPS |
| Number of Inputs | — | 1 single-ended (pseudo-differential) |
| 入力電圧範囲 | — | 0 V to 5 V or +/-5 V with +/-5 V supplies |
| Data Interface | — | Parallel (µP-compatible) |
| 出力タイプ | — | Tri-state, 8-bit parallel |
| Supply Voltage (VCC) | — | 4.5 V to 6.3 V (typ. 5 V) |
| Supply Current (typ.) | — | [DATA_NEEDED: quiescent ICC] |
| パッケージ / ケース | — | 20-CDIP (0.300 inch, 7.62mm) |
| Conversion Method | — | Successive Approximation with differential potentiometric ladder |
| Reference Type | — | External (REF/2 input) |