ADM2461EBRWZ-RL vs ADM2687EBRIZ Vergleich
Detaillierter Direktvergleich von ADM2461EBRWZ-RL von Analog Devices und ADM2687EBRIZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ Aktiv
Spezifikationsvergleich
| Parameter | ADM2461EBRWZ-RL | ADM2687EBRIZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | RS-485/RS-422 |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,10 | $8,50 |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half Duplex | Half/Full |
| Maximum Data Rate | 500 kbps | — |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | — |
| Betriebstemperatur | -40C to +85C | -40°C to +85°C |
| Gehäuse | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 16-SOIC (0.295", 7.50mm Width) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 | — |
| RoHS-Status | Compliant | — |
| Isolation Voltage | — | 5000 Vrms |
| Datenrate | — | 500 kbps |
| Number of Channels | — | 3 |
| CMTI | — | 25 kV/µs |
| ESD Protection | — | ±15 kV |
| Versorgungsspannung | — | 5 V |
| Isolated Power | — | 500 mW |
| Standards Compliance | — | ANSI/TIA/EIA-485-A-98, ISO 8482:1987(E) |
| RoHS | — | Compliant |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |