ADM2567EBRNZ vs ADM2461EBRWZ-RL Vergleich
Detaillierter Direktvergleich von ADM2567EBRNZ von Analog Devices und ADM2461EBRWZ-RL von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ AktivAnalog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ AktivSpezifikationsvergleich
| Parameter | ADM2567EBRNZ | ADM2461EBRWZ-RL |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $13,84 | $4,10 |
| Isolation Voltage | 3000 V rms | — |
| Data Rate (max) | 25 Mbps | — |
| Number of Channels | 4 (signal isolation) | — |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us | — |
| Bus ESD (IEC 61000-4-2, contact) | ±15 kV (bus pins) | — |
| Bus ESD (IEC 61000-4-2, air) | ±15 kV | — |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | ±6 kV | — |
| Protocol | RS-422 / RS-485 | RS-422, RS-485 |
| Logic-Side Supply (VIO) | 1.7 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | — |
| Gehäuse | 28-pin SOIC-W (0.295", 7.50 mm body width) | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Betriebstemperaturbereich | [DATA_NEEDED: Operating temperature range] | — |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| RoHS-Status | Compliant | Compliant |
| Montageart | Surface Mount | Surface Mount |
| Number of Drivers / Receivers | 1 / 1 | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Maximum Data Rate | — | 500 kbps |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Common-Mode Voltage Range | — | -25 V to +25 V |
| Betriebstemperatur | — | -40C to +85C |
| MSL-Level | — | 3 |