ADM2567EBRNZ vs ADM2461EBRWZ-RL Comparación
Comparación detallada lado a lado de ADM2567EBRNZ por Analog Devices y ADM2461EBRWZ-RL por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ ActivoAnalog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActivoComparación de especificaciones
| Parámetro | ADM2567EBRNZ | ADM2461EBRWZ-RL |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $13,84 | $4,10 |
| Isolation Voltage | 3000 V rms | — |
| Data Rate (max) | 25 Mbps | — |
| Number of Channels | 4 (signal isolation) | — |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us | — |
| Bus ESD (IEC 61000-4-2, contact) | ±15 kV (bus pins) | — |
| Bus ESD (IEC 61000-4-2, air) | ±15 kV | — |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | ±6 kV | — |
| Protocol | RS-422 / RS-485 | RS-422, RS-485 |
| Logic-Side Supply (VIO) | 1.7 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | — |
| Encapsulado | 28-pin SOIC-W (0.295", 7.50 mm body width) | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: Operating temperature range] | — |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Estado RoHS | Compliant | Compliant |
| Tipo de montaje | Surface Mount | Surface Mount |
| Number of Drivers / Receivers | 1 / 1 | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Maximum Data Rate | — | 500 kbps |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Common-Mode Voltage Range | — | -25 V to +25 V |
| Temperatura de funcionamiento | — | -40C to +85C |
| Nivel MSL | — | 3 |