ADM2687EBRIZ vs ADM2461EBRWZ-RL Vergleich
Detaillierter Direktvergleich von ADM2687EBRIZ von Analog Devices und ADM2461EBRWZ-RL von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ AktivSpezifikationsvergleich
| Parameter | ADM2687EBRIZ | ADM2461EBRWZ-RL |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | RS-485/RS-422 | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,50 | $4,10 |
| Isolation Voltage | 5000 Vrms | — |
| Datenrate | 500 kbps | — |
| Number of Channels | 3 | — |
| CMTI | 25 kV/µs | — |
| ESD Protection | ±15 kV | — |
| Versorgungsspannung | 5 V | — |
| Isolated Power | 500 mW | — |
| Duplex | Half/Full | Half Duplex |
| Gehäuse | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Betriebstemperatur | -40°C to +85°C | -40C to +85C |
| Standards Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987(E) | — |
| RoHS | Compliant | — |
| Montageart | Surface Mount | Surface Mount |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Protocol | — | RS-422, RS-485 |
| Maximum Data Rate | — | 500 kbps |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Common-Mode Voltage Range | — | -25 V to +25 V |
| MSL-Level | — | 3 |
| RoHS-Status | — | Compliant |