ADM2687EBRIZ vs MAX14852GWE+ Vergleich
Detaillierter Direktvergleich von ADM2687EBRIZ von Analog Devices und MAX14852GWE+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ AktivSpezifikationsvergleich
| Parameter | ADM2687EBRIZ | MAX14852GWE+ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | RS-485/RS-422 | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,50 | $7,25 |
| Isolation Voltage | 5000 Vrms | — |
| Datenrate | 500 kbps | — |
| Number of Channels | 3 | — |
| CMTI | 25 kV/µs | — |
| ESD Protection | ±15 kV | — |
| Versorgungsspannung | 5 V | — |
| Isolated Power | 500 mW | — |
| Duplex | Half/Full | Full |
| Gehäuse | 16-SOIC (0.295", 7.50mm Width) | 16-pin WSOIC (7.50 mm body width) |
| Betriebstemperatur | -40°C to +85°C | -40 °C to +105 °C |
| Standards Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987(E) | — |
| RoHS | Compliant | — |
| Montageart | Surface Mount | Surface Mount |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| Funktion | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Data Rate (low-speed mode) | — | 500 kbps |
| Data Rate (high-speed mode) | — | 25 Mbps |
| Galvanic Isolation Rating | — | 2.75 kVRMS (60 s) |
| Supply Voltage (VVDD / VBUS) | — | 1.71 V to 5.5 V |
| ESD Protection (HBM, bus pins) | — | ±35 kV |
| Fail-safe Receiver | — | Yes |
| Hot-swap Tolerant | — | Yes |
| RoHS-Status | — | Compliant |
| Isolation Technology | — | Maxim iso-loop (integrated transformer driver) |