ADM3485EAN vs MAX3485CPA+ Vergleich
Detaillierter Direktvergleich von ADM3485EAN von Analog Devices und MAX3485CPA+ von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ADM3485EAN | MAX3485CPA+ |
|---|---|---|
| Marke | Analog Devices | Maxim Integrated |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-485/RS-422 differential transceiver | RS-485/RS-422 transceiver |
| Versorgungsspannung | 3.3 V | 3.3 V |
| Maximum Data Rate | 20 Mbps | — |
| Communication Mode | Half-duplex | — |
| ESD Protection | 15 kV | [DATA_NEEDED: device ESD rating] |
| Standards Compliance | TIA/EIA RS-422 and RS-485 | — |
| Common-Mode Range | Full common-mode range | [DATA_NEEDED: receiver common-mode voltage range] |
| Receiver Input Impedance | 19 kΩ | — |
| Maximum Transceivers on Bus | 19 transceivers | — |
| Driver and Receiver Enable | Yes | — |
| Short-Circuit Protection | Yes | — |
| Supply Class | Low-power 3.3 V transceiver | — |
| Gehäuse | 8-pin SOIC | 8-pin PDIP |
| Montageart | Surface mount | Through hole |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Datenrate | — | Up to 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Communication Standard | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| Transceiver Configuration | — | Half-duplex transceiver |
| Low-Power Operation | — | 3.3 V low-power transceiver |
| EMI and Reflection Control | — | Slew-rate-limited driver intended to minimize EMI and cable reflections |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Differential Output | — | [DATA_NEEDED: differential output voltage specifications] |
| Receiver Input Range | — | [DATA_NEEDED: receiver differential input range] |
| Slew Rate | — | [DATA_NEEDED: driver slew-rate value] |