ADM3485EAN vs MAX3485CPA+ Comparaison

Comparaison détaillée côte à côte de ADM3485EAN par Analog Devices et MAX3485CPA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
ADM3485EAN ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN ✓ Actif
Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ Actif

Comparaison des spécifications

Paramètre ADM3485EAN MAX3485CPA+
Marque Analog Devices Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 differential transceiver RS-485/RS-422 transceiver
Tension d'alimentation 3.3 V 3.3 V
Maximum Data Rate 20 Mbps —
Communication Mode Half-duplex —
ESD Protection 15 kV [DATA_NEEDED: device ESD rating]
Standards Compliance TIA/EIA RS-422 and RS-485 —
Common-Mode Range Full common-mode range [DATA_NEEDED: receiver common-mode voltage range]
Receiver Input Impedance 19 kΩ —
Maximum Transceivers on Bus 19 transceivers —
Driver and Receiver Enable Yes —
Short-Circuit Protection Yes —
Supply Class Low-power 3.3 V transceiver —
Boîtier 8-pin SOIC 8-pin PDIP
Type de montage Surface mount Through hole
Statut RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Débit de données — Up to 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Communication Standard — RS-485 and RS-422
Driver Architecture — Slew-rate limited
Transceiver Configuration — Half-duplex transceiver
Low-Power Operation — 3.3 V low-power transceiver
EMI and Reflection Control — Slew-rate-limited driver intended to minimize EMI and cable reflections
Température de fonctionnement — [DATA_NEEDED: operating temperature range]
Courant d'alimentation — [DATA_NEEDED: typical and maximum supply current]
Driver Differential Output — [DATA_NEEDED: differential output voltage specifications]
Receiver Input Range — [DATA_NEEDED: receiver differential input range]
Slew Rate — [DATA_NEEDED: driver slew-rate value]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis