ADM3485EAN vs MAX3485CPA+ Vergleich

Detaillierter Direktvergleich von ADM3485EAN von Analog Devices und MAX3485CPA+ von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Analog Devices
ADM3485EAN ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN ✓ Aktiv
Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ Aktiv

Spezifikationsvergleich

Parameter ADM3485EAN MAX3485CPA+
Marke Analog Devices Maxim Integrated
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Product Type RS-485/RS-422 differential transceiver RS-485/RS-422 transceiver
Versorgungsspannung 3.3 V 3.3 V
Maximum Data Rate 20 Mbps —
Communication Mode Half-duplex —
ESD Protection 15 kV [DATA_NEEDED: device ESD rating]
Standards Compliance TIA/EIA RS-422 and RS-485 —
Common-Mode Range Full common-mode range [DATA_NEEDED: receiver common-mode voltage range]
Receiver Input Impedance 19 kΩ —
Maximum Transceivers on Bus 19 transceivers —
Driver and Receiver Enable Yes —
Short-Circuit Protection Yes —
Supply Class Low-power 3.3 V transceiver —
Gehäuse 8-pin SOIC 8-pin PDIP
Montageart Surface mount Through hole
RoHS-Status [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Datenrate — Up to 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Communication Standard — RS-485 and RS-422
Driver Architecture — Slew-rate limited
Transceiver Configuration — Half-duplex transceiver
Low-Power Operation — 3.3 V low-power transceiver
EMI and Reflection Control — Slew-rate-limited driver intended to minimize EMI and cable reflections
Betriebstemperatur — [DATA_NEEDED: operating temperature range]
Versorgungsstrom — [DATA_NEEDED: typical and maximum supply current]
Driver Differential Output — [DATA_NEEDED: differential output voltage specifications]
Receiver Input Range — [DATA_NEEDED: receiver differential input range]
Slew Rate — [DATA_NEEDED: driver slew-rate value]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern