ADM3485EAN vs MAX3485CPA+ Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ADM3485EAN disebabkan oleh Analog Devices dan MAX3485CPA+ disebabkan oleh Maxim Integrated. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | ADM3485EAN | MAX3485CPA+ |
|---|---|---|
| Merek | Analog Devices | Maxim Integrated |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | RS-485/RS-422 differential transceiver | RS-485/RS-422 transceiver |
| Tegangan Pemberi Arus | 3.3 V | 3.3 V |
| Maximum Data Rate | 20 Mbps | — |
| Communication Mode | Half-duplex | — |
| ESD Protection | 15 kV | [DATA_NEEDED: device ESD rating] |
| Standards Compliance | TIA/EIA RS-422 and RS-485 | — |
| Common-Mode Range | Full common-mode range | [DATA_NEEDED: receiver common-mode voltage range] |
| Receiver Input Impedance | 19 kΩ | — |
| Maximum Transceivers on Bus | 19 transceivers | — |
| Driver and Receiver Enable | Yes | — |
| Short-Circuit Protection | Yes | — |
| Supply Class | Low-power 3.3 V transceiver | — |
| Kemasan | 8-pin SOIC | 8-pin PDIP |
| Jenis Pemasangan | Surface mount | Through hole |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Kadar Data | — | Up to 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Communication Standard | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| Transceiver Configuration | — | Half-duplex transceiver |
| Low-Power Operation | — | 3.3 V low-power transceiver |
| EMI and Reflection Control | — | Slew-rate-limited driver intended to minimize EMI and cable reflections |
| Suhu Operasi | — | [DATA_NEEDED: operating temperature range] |
| Arus Pemberi Arus | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Differential Output | — | [DATA_NEEDED: differential output voltage specifications] |
| Receiver Input Range | — | [DATA_NEEDED: receiver differential input range] |
| Slew Rate | — | [DATA_NEEDED: driver slew-rate value] |