ADM485AQ vs ADM485ARZ Vergleich
Detaillierter Direktvergleich von ADM485AQ von Analog Devices und ADM485ARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM485AQ | ADM485ARZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $1,62 |
| Product Type | Differential RS-485/RS-422 line transceiver | — |
| Versorgungsspannung | 5 V | 5 V (single supply) |
| Maximum Data Rate | 5 Mbit/s | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Communication Standards | EIA RS-485 and RS-422 | — |
| Topologie | Bidirectional multipoint bus transmission lines | — |
| Betriebstemperaturbereich | Commercial and industrial temperature range | -40 C to +85 C |
| Gehäuse | 8-pin ceramic DIP | SOIC-8 (SO-8) / SO-8 |
| Package Designation | AQ | — |
| Switching Speed | Extremely fast switching speed | — |
| Driver Propagation Delay | Minimal | — |
| Differential Signaling | Balanced data transmission | — |
| EMI Behavior | Low skew is designed to minimize EMI interference | — |
| Montagestil | Through-hole | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Datenrate | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Montageart | — | Surface Mount |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL-Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |