ADM485AQ vs ADM485ARZ Comparación
Comparación detallada lado a lado de ADM485AQ por Analog Devices y ADM485ARZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ ActivoComparación de especificaciones
| Parámetro | ADM485AQ | ADM485ARZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,00 | $1,62 |
| Product Type | Differential RS-485/RS-422 line transceiver | — |
| Tensión de alimentación | 5 V | 5 V (single supply) |
| Maximum Data Rate | 5 Mbit/s | — |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Communication Standards | EIA RS-485 and RS-422 | — |
| Topología | Bidirectional multipoint bus transmission lines | — |
| Rango de temperatura de funcionamiento | Commercial and industrial temperature range | -40 C to +85 C |
| Encapsulado | 8-pin ceramic DIP | SOIC-8 (SO-8) / SO-8 |
| Package Designation | AQ | — |
| Switching Speed | Extremely fast switching speed | — |
| Driver Propagation Delay | Minimal | — |
| Differential Signaling | Balanced data transmission | — |
| EMI Behavior | Low skew is designed to minimize EMI interference | — |
| Estilo de montaje | Through-hole | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Velocidad de datos | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Tipo de montaje | — | Surface Mount |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Nivel MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |