ADM485ARZ vs ADM483JR Vergleich
Detaillierter Direktvergleich von ADM485ARZ von Analog Devices und ADM483JR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM485ARZ | ADM483JR |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Versorgungsspannung | 5 V (single supply) | 5 V |
| Datenrate | 5 Mbps (max) | Up to 250 kbps |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Betriebstemperaturbereich | -40 C to +85 C | -40°C to +85°C |
| Gehäuse | SOIC-8 (SO-8) / SO-8 | 8-lead SOIC, 3.90 mm width |
| Montageart | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSL-Level | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Low-power differential line transceiver |
| Communication Standard | — | EIA RS-485/RS-422 compliant |
| Operating Mode | — | Half-duplex |
| Typical Operating Supply Current | — | 120 µA |
| Shutdown Supply Current | — | 100 nA |
| Bus Common-Mode Range | — | -7 V to +12 V |
| Maximum Transceivers on One Bus | — | 32 transceivers |
| Output State When Disabled or Powered Off | — | High impedance |
| Slew Rate | — | Limited for low EMI |
| Protection | — | Thermal shutdown and short-circuit protection |
| Pin Compatibility | — | Pin-compatible with MAX483 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |