ADM485ARZ vs ADM483JR Comparación
Comparación detallada lado a lado de ADM485ARZ por Analog Devices y ADM483JR por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ ActivoComparación de especificaciones
| Parámetro | ADM485ARZ | ADM483JR |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tensión de alimentación | 5 V (single supply) | 5 V |
| Velocidad de datos | 5 Mbps (max) | Up to 250 kbps |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C | -40°C to +85°C |
| Encapsulado | SOIC-8 (SO-8) / SO-8 | 8-lead SOIC, 3.90 mm width |
| Tipo de montaje | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Nivel MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Low-power differential line transceiver |
| Communication Standard | — | EIA RS-485/RS-422 compliant |
| Operating Mode | — | Half-duplex |
| Typical Operating Supply Current | — | 120 µA |
| Shutdown Supply Current | — | 100 nA |
| Bus Common-Mode Range | — | -7 V to +12 V |
| Maximum Transceivers on One Bus | — | 32 transceivers |
| Output State When Disabled or Powered Off | — | High impedance |
| Slew Rate | — | Limited for low EMI |
| Protection | — | Thermal shutdown and short-circuit protection |
| Pin Compatibility | — | Pin-compatible with MAX483 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |