ADM485JRZ vs ADM485ARZ Vergleich
Detaillierter Direktvergleich von ADM485JRZ von Analog Devices und ADM485ARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM485JRZ | ADM485ARZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 5 Mbits/s | — |
| Communication Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and RS-422 | — |
| Driver Output Count | 1 differential driver | — |
| Receiver Input Count | 1 differential receiver | — |
| Driver and Receiver Control | Independently enabled | — |
| Gehäuse | 8-pin SOIC | SOIC-8 (SO-8) / SO-8 |
| Montageart | Surface mount | Surface Mount |
| Temperature Grade | Commercial and industrial temperature range | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Versorgungsstrom | [DATA_NEEDED: driver and receiver supply current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: driver output differential voltage] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Versorgungsspannung | — | 5 V (single supply) |
| Datenrate | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL-Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |