ADM485JRZ vs ADM485ARZ 对比
详细并排对比 ADM485JRZ 出自 Analog Devices 和 ADM485ARZ 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ 量产中规格对比
| 参数 | ADM485JRZ | ADM485ARZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 5 Mbits/s | — |
| Communication Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and RS-422 | — |
| Driver Output Count | 1 differential driver | — |
| Receiver Input Count | 1 differential receiver | — |
| Driver and Receiver Control | Independently enabled | — |
| 封装 | 8-pin SOIC | SOIC-8 (SO-8) / SO-8 |
| 安装类型 | Surface mount | Surface Mount |
| Temperature Grade | Commercial and industrial temperature range | — |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| 静态电流 | [DATA_NEEDED: quiescent current] | — |
| 电源电流 | [DATA_NEEDED: driver and receiver supply current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: driver output differential voltage] | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| 电源电压 | — | 5 V (single supply) |
| 数据速率 | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL 等级 | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |