ADS8343E vs ADS8341E Vergleich
Detaillierter Direktvergleich von ADS8343E von Texas Instruments und ADS8341E von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ADS8343E | ADS8341E |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| ADC Type | Successive-approximation sampling ADC | — |
| Auflösung | 16 bit | 16 bit |
| Conversion Rate | 100 kSPS | 100 kHz |
| Total Input Channels | 4 channels | — |
| Single-Ended Input Configuration | 4 channels | — |
| Differential Input Configuration | 2 channels | — |
| Signal-to-Noise and Distortion | 86 dB SINAD | — |
| Input Range | Bipolar, ±VREF | — |
| Supply Voltage Range | 2.7 V to 5.25 V | [DATA_NEEDED: Supply Voltage Range] |
| Reference Voltage Range | 500 mV to VCC/2 | — |
| Typical Power Dissipation | 8 mW at 100 kSPS and 5 V supply | 8 mW at 100 kHz throughput and 5 V supply |
| Betriebstemperaturbereich | -40 °C to +85 °C | -40 °C to +85 °C |
| Gehäuse | 16-pin SSOP | SSOP-16 |
| Montageart | Surface mount | Surface mount |
| Schnittstellentyp | Serial interface | — |
| Shutdown Mode | Yes | — |
| Input Multiplexer | Onboard 4-channel multiplexer | — |
| Pin Compatibility | Pin-for-pin compatible with ADS7841 and ADS8341 | Pin-for-pin compatible with ADS7841 |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS Status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH Status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: Lead-Free Status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Input Channels | — | 4 single-ended or 2 differential channels |
| Signal-to-Noise and Distortion Ratio | — | 86 dB SINAD |
| Architecture | — | Successive-approximation sampling ADC |
| Output Interface | — | Synchronous serial interface |
| Typical Supply Condition | — | 5 V |
| Onboard Multiplexer | — | Yes |
| Low-Power Suitability | — | Designed for battery-operated systems |
| Remote Acquisition Suitability | — | Serial interface supports low-cost isolated data acquisition |
| Eingangsspannungsbereich | — | [DATA_NEEDED: Input Voltage Range] |
| Referenzspannung | — | [DATA_NEEDED: Reference Voltage] |
| Integral Nonlinearity | — | [DATA_NEEDED: Integral Nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: Differential Nonlinearity] |