ADS8343E vs ADS8341E 比較
詳細並排比較 ADS8343E 由 Texas Instruments 與 ADS8341E 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | ADS8343E | ADS8341E |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | 啟用中 | 啟用中 |
| ADC Type | Successive-approximation sampling ADC | — |
| 解析度 | 16 bit | 16 bit |
| Conversion Rate | 100 kSPS | 100 kHz |
| Total Input Channels | 4 channels | — |
| Single-Ended Input Configuration | 4 channels | — |
| Differential Input Configuration | 2 channels | — |
| Signal-to-Noise and Distortion | 86 dB SINAD | — |
| Input Range | Bipolar, ±VREF | — |
| Supply Voltage Range | 2.7 V to 5.25 V | [DATA_NEEDED: Supply Voltage Range] |
| Reference Voltage Range | 500 mV to VCC/2 | — |
| Typical Power Dissipation | 8 mW at 100 kSPS and 5 V supply | 8 mW at 100 kHz throughput and 5 V supply |
| 工作溫度範圍 | -40 °C to +85 °C | -40 °C to +85 °C |
| 封裝 | 16-pin SSOP | SSOP-16 |
| 安裝類型 | Surface mount | Surface mount |
| 介面類型 | Serial interface | — |
| Shutdown Mode | Yes | — |
| Input Multiplexer | Onboard 4-channel multiplexer | — |
| Pin Compatibility | Pin-for-pin compatible with ADS7841 and ADS8341 | Pin-for-pin compatible with ADS7841 |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS Status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH Status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: Lead-Free Status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Input Channels | — | 4 single-ended or 2 differential channels |
| Signal-to-Noise and Distortion Ratio | — | 86 dB SINAD |
| Architecture | — | Successive-approximation sampling ADC |
| Output Interface | — | Synchronous serial interface |
| Typical Supply Condition | — | 5 V |
| Onboard Multiplexer | — | Yes |
| Low-Power Suitability | — | Designed for battery-operated systems |
| Remote Acquisition Suitability | — | Serial interface supports low-cost isolated data acquisition |
| 輸入電壓範圍 | — | [DATA_NEEDED: Input Voltage Range] |
| 參考電壓 | — | [DATA_NEEDED: Reference Voltage] |
| Integral Nonlinearity | — | [DATA_NEEDED: Integral Nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: Differential Nonlinearity] |