ADS8568SPM vs ADS8568SPMR Vergleich
Detaillierter Direktvergleich von ADS8568SPM von Texas Instruments und ADS8568SPMR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ADS8568SPM | ADS8568SPMR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $17,10 | $15,80 |
| Auflösung | 16 bits | 16 bits |
| Number of Channels | 8 | 8 |
| Sampling Architecture | Simultaneous-sampling SAR | — |
| Max Sample Rate (Parallel) | 540 kSPS per channel | — |
| Max Sample Rate (Serial) | 450 kSPS per channel | — |
| Eingangsspannungsbereich | ±10 V or ±5 V (bipolar, software-selectable per channel-pair) | — |
| Analog Supply Voltage (AVDD) | 4.75 V to 5.25 V | — |
| Digital Supply Voltage (DVDD) | 2.7 V to 3.6 V | — |
| Total Power Consumption (AVDD) | 335 mW at full throughput | — |
| Analog Input Impedance | 1 MΩ (input clamp protected) | — |
| Integral Nonlinearity (INL) | [DATA_NEEDED: INL in LSB] | — |
| Signal-to-Noise Ratio (SNR) | [DATA_NEEDED: SNR in dB] | 91.5 dB |
| Total Harmonic Distortion (THD) | [DATA_NEEDED: THD in dB] | -94 dB typical |
| Betriebstemperaturbereich | -40 °C to +125 °C | -40C to +125C (industrial) |
| Gehäuse | 64-pin LQFP (PM), 10x10 mm | 64-pin LQFP (PMR), 10x10 mm |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (168 hours) | — |
| RoHS-Status | Compliant | Compliant |
| Digital Interface | Parallel (16-/8-bit) or Serial (SPI-compatible) | — |
| Internal Reference | Yes (with reference buffer) | — |
| Auto-Sleep Mode | Yes (programmable wake-up) | — |
| Sampling Type | — | Simultaneous Sampling |
| ADC Architecture | — | SAR (Successive Approximation Register) |
| Maximum Data Rate (Parallel Mode) | — | 510 kSPS per channel |
| Maximum Data Rate (Serial Mode) | — | 400 kSPS per channel |
| Input Range | — | +/-10 V or +/-5 V (software configurable, bipolar) |
| Schnittstelle | — | Parallel (PAR) or Serial (SER) |
| Input Type | — | Bipolar, single-ended |
| Analog Input Protection | — | On-chip analog input clamp |
| Anti-Aliasing Filter | — | Second-order, integrated |