ADS8568SPM vs ADS8568SPMR Comparaison
Comparaison détaillée côte à côte de ADS8568SPM par Texas Instruments et ADS8568SPMR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ADS8568SPM | ADS8568SPMR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $17,10 | $15,80 |
| Résolution | 16 bits | 16 bits |
| Number of Channels | 8 | 8 |
| Sampling Architecture | Simultaneous-sampling SAR | — |
| Max Sample Rate (Parallel) | 540 kSPS per channel | — |
| Max Sample Rate (Serial) | 450 kSPS per channel | — |
| Plage de tension d'entrée | ±10 V or ±5 V (bipolar, software-selectable per channel-pair) | — |
| Analog Supply Voltage (AVDD) | 4.75 V to 5.25 V | — |
| Digital Supply Voltage (DVDD) | 2.7 V to 3.6 V | — |
| Total Power Consumption (AVDD) | 335 mW at full throughput | — |
| Analog Input Impedance | 1 MΩ (input clamp protected) | — |
| Integral Nonlinearity (INL) | [DATA_NEEDED: INL in LSB] | — |
| Signal-to-Noise Ratio (SNR) | [DATA_NEEDED: SNR in dB] | 91.5 dB |
| Total Harmonic Distortion (THD) | [DATA_NEEDED: THD in dB] | -94 dB typical |
| Plage de température de fonctionnement | -40 °C to +125 °C | -40C to +125C (industrial) |
| Boîtier | 64-pin LQFP (PM), 10x10 mm | 64-pin LQFP (PMR), 10x10 mm |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | Compliant |
| Digital Interface | Parallel (16-/8-bit) or Serial (SPI-compatible) | — |
| Internal Reference | Yes (with reference buffer) | — |
| Auto-Sleep Mode | Yes (programmable wake-up) | — |
| Sampling Type | — | Simultaneous Sampling |
| ADC Architecture | — | SAR (Successive Approximation Register) |
| Maximum Data Rate (Parallel Mode) | — | 510 kSPS per channel |
| Maximum Data Rate (Serial Mode) | — | 400 kSPS per channel |
| Input Range | — | +/-10 V or +/-5 V (software configurable, bipolar) |
| Interface | — | Parallel (PAR) or Serial (SER) |
| Input Type | — | Bipolar, single-ended |
| Analog Input Protection | — | On-chip analog input clamp |
| Anti-Aliasing Filter | — | Second-order, integrated |