ATSAM4S8BA-AN vs ATSAM4SD16CA-AUR Vergleich
Detaillierter Direktvergleich von ATSAM4S8BA-AN von Microchip Technology und ATSAM4SD16CA-AUR von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAM4S8BA-AN - SAM4S 120MHz Cortex-M4 MCU 512KB | Microchip
ATSAM4S8BA-AN ✓ AktivMicrochip Technology
ATSAM4SD16CA-AUR - 120MHz Cortex-M4 1MB Flash MCU | Microchip
ATSAM4SD16CA-AUR ✓ AktivSpezifikationsvergleich
| Parameter | ATSAM4S8BA-AN | ATSAM4SD16CA-AUR |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,10 | $7,49 |
| Core | ARM Cortex-M4 with FPU | — |
| Operating Frequency | 120 MHz | — |
| Flash Memory | 512 KB | — |
| SRAM | 128 KB | 160 KB |
| Supply Voltage (VDDIO) | 3.0 V to 3.6 V | — |
| Operating Voltage Range (with internal regulator) | 1.62 V to 3.6 V | — |
| Active Power Consumption | 200 uA/MHz | — |
| Gehäuse | 64-LQFP (10x10 mm) | 100-pin LQFP (14x14 mm) |
| Montageart | Surface Mount | Surface Mount (Tape & Reel) |
| Pin-Anzahl | 64 | — |
| I/O Pins | [DATA_NEEDED: number of GPIO pins for LQFP-64 variant] | — |
| ADC | 12-bit, up to 1 Msps | 12-bit, up to 24 channels (per datasheet family) |
| DAC | 12-bit | — |
| USB | USB 2.0 Full-Speed Device with on-chip PHY | — |
| Betriebstemperatur | -40C to +85C | -40 C to +85 C (industrial) |
| RoHS-Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| Pin-to-Pin Compatible Family | SAM7S, SAM3N, SAM3S | — |
| Core Architecture | — | ARM Cortex-M4 with DSP extensions and Thumb-2 |
| CPU Frequency | — | 120 MHz maximum |
| Program Memory (Flash) | — | 1 MB (2 x 512 KB dual-bank) |
| Instruction Cache | — | 2 KB |
| MPU (Memory Protection Unit) | — | Yes |
| Versorgungsspannung | — | 1.62 V to 3.6 V |
| USB Interface | — | USB 2.0 Full-Speed with on-chip transceiver |
| Timers | — | Multiple 16/32-bit timer/counter channels with PWM |
| Communication Interfaces | — | 5x USART, 2x UART, 2x TWI (I2C), 2x SPI, 1x HS-SPI |
| MSL-Level | — | MSL3 (per LQFP moisture classification) |
| Recommended Die Revision for New Designs | — | Revision B (use ATSAM4SD16CB-AUR / -CFUR variants) |