ATSAM4S8BA-AN vs ATSAM4SD16CA-AUR Comparaison
Comparaison détaillée côte à côte de ATSAM4S8BA-AN par Microchip Technology et ATSAM4SD16CA-AUR par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAM4S8BA-AN - SAM4S 120MHz Cortex-M4 MCU 512KB | Microchip
ATSAM4S8BA-AN ✓ ActifMicrochip Technology
ATSAM4SD16CA-AUR - 120MHz Cortex-M4 1MB Flash MCU | Microchip
ATSAM4SD16CA-AUR ✓ ActifComparaison des spécifications
| Paramètre | ATSAM4S8BA-AN | ATSAM4SD16CA-AUR |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,10 | $7,49 |
| Core | ARM Cortex-M4 with FPU | — |
| Operating Frequency | 120 MHz | — |
| Flash Memory | 512 KB | — |
| SRAM | 128 KB | 160 KB |
| Supply Voltage (VDDIO) | 3.0 V to 3.6 V | — |
| Operating Voltage Range (with internal regulator) | 1.62 V to 3.6 V | — |
| Active Power Consumption | 200 uA/MHz | — |
| Boîtier | 64-LQFP (10x10 mm) | 100-pin LQFP (14x14 mm) |
| Type de montage | Surface Mount | Surface Mount (Tape & Reel) |
| Nombre de broches | 64 | — |
| I/O Pins | [DATA_NEEDED: number of GPIO pins for LQFP-64 variant] | — |
| ADC | 12-bit, up to 1 Msps | 12-bit, up to 24 channels (per datasheet family) |
| DAC | 12-bit | — |
| USB | USB 2.0 Full-Speed Device with on-chip PHY | — |
| Température de fonctionnement | -40C to +85C | -40 C to +85 C (industrial) |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Pin-to-Pin Compatible Family | SAM7S, SAM3N, SAM3S | — |
| Core Architecture | — | ARM Cortex-M4 with DSP extensions and Thumb-2 |
| CPU Frequency | — | 120 MHz maximum |
| Program Memory (Flash) | — | 1 MB (2 x 512 KB dual-bank) |
| Instruction Cache | — | 2 KB |
| MPU (Memory Protection Unit) | — | Yes |
| Tension d'alimentation | — | 1.62 V to 3.6 V |
| USB Interface | — | USB 2.0 Full-Speed with on-chip transceiver |
| Timers | — | Multiple 16/32-bit timer/counter channels with PWM |
| Communication Interfaces | — | 5x USART, 2x UART, 2x TWI (I2C), 2x SPI, 1x HS-SPI |
| Niveau MSL | — | MSL3 (per LQFP moisture classification) |
| Recommended Die Revision for New Designs | — | Revision B (use ATSAM4SD16CB-AUR / -CFUR variants) |