ATSAMA5D35-EK vs ATSAM4L8-XSTK Vergleich
Detaillierter Direktvergleich von ATSAMA5D35-EK von Microchip Technology und ATSAM4L8-XSTK von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ AktivMicrochip Technology
ATSAM4L8-XSTK - SAM4L8 Cortex-M4 Eval Starter Kit | Microchip
ATSAM4L8-XSTK ✓ AktivSpezifikationsvergleich
| Parameter | ATSAMA5D35-EK | ATSAM4L8-XSTK |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Development Boards | Development Boards |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $629,00 | $151,72 |
| Product Type | MPU Evaluation Board / Development Kit | MCU 32-Bit Embedded Evaluation Board (Starter Kit) |
| MPU Series | SAMA5D3 (ARM Cortex-A5) | — |
| Core Processor | ARM Cortex-A5 32-bit | ARM Cortex-M4, 32-bit |
| Maximum CPU Clock | 536 MHz | — |
| Performance | 850 DMIPS | — |
| Internal SRAM | 128 KB | — |
| L1 Instruction Cache | 32 KB | — |
| L1 Data Cache | 32 KB | — |
| Floating Point Unit | Yes (VFPv4 + NEON) | — |
| On-board DRAM | 512 MB DDR2 | — |
| Flash Memory | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM | — |
| Ethernet | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 | — |
| USB | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device | — |
| CAN | 2x CAN-FD controllers | — |
| LCD Controller | Integrated, supports up to 1920x1080 (HDMI bridge on board) | — |
| Cryptography | AES, SHA, TRNG hardware accelerators | — |
| Low-Power Mode Consumption | < 0.5 mW | — |
| Operating Temperature (industrial variants) | -40 C to +105 C | — |
| MPU Package (silicon) | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch | — |
| Board Form Factor | SAMA5D3-EK baseboard + SAMA5D35 module | — |
| Software Support | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal | — |
| Kit Contents | Board, cables, power supply | SAM4L8 Xplained Pro board + SLCD1, I/O1, OLED1, PROTO1 Xplained Pro extension kits |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Manufacturer Part Number | — | ATSAM4L8-XSTK |
| Target MCU Family | — | SAM4L (ATSAM4LC8) |
| Debug Interface | — | Embedded debugger (EDBG) with virtual COM port and data gateway |
| Extension Board Standard | — | Xplained Pro |
| Supported IDE | — | Microchip Studio (Atmel Studio), Atmel START |
| Display Peripherals | — | Segment LCD (SLCD1), OLED display (OLED1) |
| Touch Support | — | QTouch capacitive touch via I/O1 Xplained Pro |
| Prototyping Area | — | PROTO1 Xplained Pro extension board |
| Packaging | — | Box |
| Product Status | — | Active |
| Betriebsversorgungsspannung | — | [DATA_NEEDED: operating supply voltage] |
| Distributor Availability | — | In stock at multiple distributors (6095 pcs reported, Feb 2026) |