ATSAMA5D35-EK vs ATSAM4L8-XSTK Comparaison
Comparaison détaillée côte à côte de ATSAMA5D35-EK par Microchip Technology et ATSAM4L8-XSTK par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ ActifMicrochip Technology
ATSAM4L8-XSTK - SAM4L8 Cortex-M4 Eval Starter Kit | Microchip
ATSAM4L8-XSTK ✓ ActifComparaison des spécifications
| Paramètre | ATSAMA5D35-EK | ATSAM4L8-XSTK |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Development Boards | Development Boards |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $629,00 | $151,72 |
| Product Type | MPU Evaluation Board / Development Kit | MCU 32-Bit Embedded Evaluation Board (Starter Kit) |
| MPU Series | SAMA5D3 (ARM Cortex-A5) | — |
| Core Processor | ARM Cortex-A5 32-bit | ARM Cortex-M4, 32-bit |
| Maximum CPU Clock | 536 MHz | — |
| Performance | 850 DMIPS | — |
| Internal SRAM | 128 KB | — |
| L1 Instruction Cache | 32 KB | — |
| L1 Data Cache | 32 KB | — |
| Floating Point Unit | Yes (VFPv4 + NEON) | — |
| On-board DRAM | 512 MB DDR2 | — |
| Flash Memory | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM | — |
| Ethernet | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 | — |
| USB | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device | — |
| CAN | 2x CAN-FD controllers | — |
| LCD Controller | Integrated, supports up to 1920x1080 (HDMI bridge on board) | — |
| Cryptography | AES, SHA, TRNG hardware accelerators | — |
| Low-Power Mode Consumption | < 0.5 mW | — |
| Operating Temperature (industrial variants) | -40 C to +105 C | — |
| MPU Package (silicon) | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch | — |
| Board Form Factor | SAMA5D3-EK baseboard + SAMA5D35 module | — |
| Software Support | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal | — |
| Kit Contents | Board, cables, power supply | SAM4L8 Xplained Pro board + SLCD1, I/O1, OLED1, PROTO1 Xplained Pro extension kits |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Manufacturer Part Number | — | ATSAM4L8-XSTK |
| Target MCU Family | — | SAM4L (ATSAM4LC8) |
| Debug Interface | — | Embedded debugger (EDBG) with virtual COM port and data gateway |
| Extension Board Standard | — | Xplained Pro |
| Supported IDE | — | Microchip Studio (Atmel Studio), Atmel START |
| Display Peripherals | — | Segment LCD (SLCD1), OLED display (OLED1) |
| Touch Support | — | QTouch capacitive touch via I/O1 Xplained Pro |
| Prototyping Area | — | PROTO1 Xplained Pro extension board |
| Packaging | — | Box |
| Product Status | — | Active |
| Tension d'alimentation de fonctionnement | — | [DATA_NEEDED: operating supply voltage] |
| Distributor Availability | — | In stock at multiple distributors (6095 pcs reported, Feb 2026) |