ATSAMD21G17D-MU vs ATSAMD21G17L-MNT Vergleich
Detaillierter Direktvergleich von ATSAMD21G17D-MU von Microchip Technology und ATSAMD21G17L-MNT von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAMD21G17D-MU - 128KB Flash Cortex-M0+ MCU 48MHz 48-QFN | Microchip
ATSAMD21G17D-MU ✓ AktivMicrochip Technology
ATSAMD21G17L-MNT - SAM D21G Cortex-M0+ MCU 128KB Flash 48-QFN | Microchip
ATSAMD21G17L-MNT ✓ AktivSpezifikationsvergleich
| Parameter | ATSAMD21G17D-MU | ATSAMD21G17L-MNT |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,10 | $1,45 |
| Core | ARM Cortex-M0+ (32-bit) | — |
| Series | SAM D21G (Functional Safety, FuSa) | ATSAMD21 |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Program Memory | 128 KB (128K x 8) | — |
| RWW Flash Section | 4 KB | — |
| SRAM | 16 KB | 16 KB |
| Operating Voltage | 1.62 V to 3.63 V | — |
| Betriebstemperatur | -40 C to +85 C (Industrial) | -40C to +105C (L-suffix, industrial) |
| Gehäuse | 48-QFN (7x7 mm) with Exposed Pad | 48-QFN (7x7 mm) with exposed pad |
| Montageart | Surface Mount | Surface Mount, Tape and Reel (MNT suffix) |
| USB Interface | USB 2.0 Full-Speed with on-chip transceiver | — |
| ADC | 12-bit, up to 20 channels | 12-bit, up to 20 channels, 350 ksps |
| SERCOM | Up to 6 configurable serial peripherals | — |
| PTC Touch Channels | Supported (buttons, slider, wheel) | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | 3 (168 hours) | [DATA_NEEDED: MSL moisture sensitivity level] |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Family | — | SAM D21G |
| Flash Memory | — | 128 KB (128K x 8) |
| Read-While-Write Flash Partition | — | 4 KB |
| Supply Voltage (VDD) | — | 1.62 V to 3.63 V |
| I/O Voltage | — | 1.62 V to 3.63 V (same as VDD) |
| GPIO Count | — | Up to 38 |
| Analog Comparators | — | 2 |
| SERCOM Modules | — | 6 (configurable as UART/SPI/I2C) |
| USB | — | USB 2.0 Full-Speed Device, integrated transceiver |
| Peripheral Touch Controller (PTC) | — | Yes (capacitive touch sensing) |
| DMA Channels | — | 6 |
| Timers/Counters | — | TC0..TC5 + TCC0..TCC1, multiple PWM outputs |
| Lead Finish | — | Matte tin (lead-free, GREEN) |