ATSAMD21G17D-MU vs ATSAMD21G17L-MNT Comparaison
Comparaison détaillée côte à côte de ATSAMD21G17D-MU par Microchip Technology et ATSAMD21G17L-MNT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAMD21G17D-MU - 128KB Flash Cortex-M0+ MCU 48MHz 48-QFN | Microchip
ATSAMD21G17D-MU ✓ ActifMicrochip Technology
ATSAMD21G17L-MNT - SAM D21G Cortex-M0+ MCU 128KB Flash 48-QFN | Microchip
ATSAMD21G17L-MNT ✓ ActifComparaison des spécifications
| Paramètre | ATSAMD21G17D-MU | ATSAMD21G17L-MNT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,10 | $1,45 |
| Core | ARM Cortex-M0+ (32-bit) | — |
| Series | SAM D21G (Functional Safety, FuSa) | ATSAMD21 |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Program Memory | 128 KB (128K x 8) | — |
| RWW Flash Section | 4 KB | — |
| SRAM | 16 KB | 16 KB |
| Operating Voltage | 1.62 V to 3.63 V | — |
| Température de fonctionnement | -40 C to +85 C (Industrial) | -40C to +105C (L-suffix, industrial) |
| Boîtier | 48-QFN (7x7 mm) with Exposed Pad | 48-QFN (7x7 mm) with exposed pad |
| Type de montage | Surface Mount | Surface Mount, Tape and Reel (MNT suffix) |
| USB Interface | USB 2.0 Full-Speed with on-chip transceiver | — |
| ADC | 12-bit, up to 20 channels | 12-bit, up to 20 channels, 350 ksps |
| SERCOM | Up to 6 configurable serial peripherals | — |
| PTC Touch Channels | Supported (buttons, slider, wheel) | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | 3 (168 hours) | [DATA_NEEDED: MSL moisture sensitivity level] |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Family | — | SAM D21G |
| Flash Memory | — | 128 KB (128K x 8) |
| Read-While-Write Flash Partition | — | 4 KB |
| Supply Voltage (VDD) | — | 1.62 V to 3.63 V |
| I/O Voltage | — | 1.62 V to 3.63 V (same as VDD) |
| GPIO Count | — | Up to 38 |
| Analog Comparators | — | 2 |
| SERCOM Modules | — | 6 (configurable as UART/SPI/I2C) |
| USB | — | USB 2.0 Full-Speed Device, integrated transceiver |
| Peripheral Touch Controller (PTC) | — | Yes (capacitive touch sensing) |
| DMA Channels | — | 6 |
| Timers/Counters | — | TC0..TC5 + TCC0..TCC1, multiple PWM outputs |
| Lead Finish | — | Matte tin (lead-free, GREEN) |