ATSAMD21J15B-MFT vs ATSAMD21J15B-MU Vergleich
Detaillierter Direktvergleich von ATSAMD21J15B-MFT von Microchip Technology und ATSAMD21J15B-MU von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAMD21J15B-MFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21J15B-MFT ✓ AktivMicrochip Technology
ATSAMD21J15B-MU - 32KB Flash Cortex-M0+ MCU | Microchip
ATSAMD21J15B-MU ✓ AktivSpezifikationsvergleich
| Parameter | ATSAMD21J15B-MFT | ATSAMD21J15B-MU |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,39 | $1,74 |
| Core Architecture | ARM Cortex-M0+ (ARMv6-M) | ARMv6-M, 32-bit |
| Maximum CPU Frequency | 48 MHz | — |
| CoreMark Score | 2.46 CoreMark/MHz | — |
| Program Flash Memory | 32 KB | — |
| SRAM | 4 KB | 4 KB |
| Gehäuse | 64-pin QFN (9x9 mm) | 64-pin QFN (9x9 mm) with exposed pad |
| Operating Voltage (VDD) | 1.62 V to 3.63 V | — |
| Betriebstemperatur | -40C to +125C (industrial grade) | -40 C to +85 C (industrial) |
| GPIO Count | Up to 52 (package-dependent) | — |
| ADC | 12-bit, up to 20 channels | 12-bit, up to 350 ksps, up to 14 channels |
| DAC | 10-bit, 1 channel | 10-bit, 350 ksps, 1 channel |
| Communication Interfaces | Up to 6x SERCOM (USART/I2C/SPI) | — |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | USB 2.0 Full-Speed Device/Host with on-chip transceiver |
| Timers | Multiple 16-bit TC, 32-bit TCC, RTC | — |
| DMA Channels | 12 channels | — |
| Internal Oscillator | 48 MHz DFLL-calibrated RC (2% accuracy) | — |
| External Crystal Support | 32.768 kHz RTC crystal, 0.4-12 MHz system crystal | — |
| Montageart | Surface Mount | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | 3 (168 hours) | — |
| Core | — | ARM Cortex-M0+ |
| Maximale Taktfrequenz | — | 48 MHz |
| CoreMark/MHz | — | 2.46 |
| Flash Program Memory | — | 32 KB |
| Versorgungsspannung | — | 1.62 V to 3.63 V |
| SERCOM Modules | — | Up to 6 (configurable as I2C/SPI/UART) |
| Timers/Counters | — | Three 24-bit TC, one 16-bit TCC |
| I2S | — | 2 interfaces |
| External Interrupts | — | 16 channels plus 1 NMI |
| Debug Interface | — | Two-pin Serial Wire Debug (SWD) |