ATSAMD21J15B-MFT vs ATSAMD21J15B-MU 비교
다음의 상세 나란히 비교: ATSAMD21J15B-MFT 제조: Microchip Technology 및 ATSAMD21J15B-MU 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAMD21J15B-MFT - 48MHz Cortex-M0+ MCU, 32KB Flash | Microchip
ATSAMD21J15B-MFT ✓ 활성사양 비교
| 파라미터 | ATSAMD21J15B-MFT | ATSAMD21J15B-MU |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.39 | $1.74 |
| Core Architecture | ARM Cortex-M0+ (ARMv6-M) | ARMv6-M, 32-bit |
| Maximum CPU Frequency | 48 MHz | — |
| CoreMark Score | 2.46 CoreMark/MHz | — |
| Program Flash Memory | 32 KB | — |
| SRAM | 4 KB | 4 KB |
| 패키지 | 64-pin QFN (9x9 mm) | 64-pin QFN (9x9 mm) with exposed pad |
| Operating Voltage (VDD) | 1.62 V to 3.63 V | — |
| 동작 온도 | -40C to +125C (industrial grade) | -40 C to +85 C (industrial) |
| GPIO Count | Up to 52 (package-dependent) | — |
| ADC | 12-bit, up to 20 channels | 12-bit, up to 350 ksps, up to 14 channels |
| DAC | 10-bit, 1 channel | 10-bit, 350 ksps, 1 channel |
| Communication Interfaces | Up to 6x SERCOM (USART/I2C/SPI) | — |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | USB 2.0 Full-Speed Device/Host with on-chip transceiver |
| Timers | Multiple 16-bit TC, 32-bit TCC, RTC | — |
| DMA Channels | 12 channels | — |
| Internal Oscillator | 48 MHz DFLL-calibrated RC (2% accuracy) | — |
| External Crystal Support | 32.768 kHz RTC crystal, 0.4-12 MHz system crystal | — |
| 실장 유형 | Surface Mount | — |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | 3 (168 hours) | — |
| Core | — | ARM Cortex-M0+ |
| 최대 클록 주파수 | — | 48 MHz |
| CoreMark/MHz | — | 2.46 |
| Flash Program Memory | — | 32 KB |
| 공급 전압 | — | 1.62 V to 3.63 V |
| SERCOM Modules | — | Up to 6 (configurable as I2C/SPI/UART) |
| Timers/Counters | — | Three 24-bit TC, one 16-bit TCC |
| I2S | — | 2 interfaces |
| External Interrupts | — | 16 channels plus 1 NMI |
| Debug Interface | — | Two-pin Serial Wire Debug (SWD) |