ATSAME54N20A-AU-EFP vs ATSAME53N20A-AU-EFP Vergleich
Detaillierter Direktvergleich von ATSAME54N20A-AU-EFP von Microchip Technology und ATSAME53N20A-AU-EFP von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAME54N20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54N20A-AU-EFP ✓ AktivMicrochip Technology
ATSAME53N20A-AU-EFP - 120MHz Cortex-M4F MCU 1MB Flash TQFP-100
ATSAME53N20A-AU-EFP ✓ AktivSpezifikationsvergleich
| Parameter | ATSAME54N20A-AU-EFP | ATSAME53N20A-AU-EFP |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,10 | $7,35 |
| Core Architecture | ARM Cortex-M4F with FPU and DSP | 32-bit RISC |
| Maximum CPU Clock | 120 MHz | — |
| Program Memory (Flash) | 1 MB with ECC, dual-panel | 1 MB (1M x 8) with ECC, Dual-Panel |
| SRAM | 256 KB with ECC | 256 KB with ECC |
| Gehäuse | 100-pin TQFP (14x14 mm) | 100-pin TQFP, 14x14 mm |
| Operating Voltage (VDDIO) | 1.71 V to 3.6 V | — |
| Betriebstemperatur | -40C to +125C (automotive) | -40C to +85C (industrial) |
| USB | USB 2.0 Full-Speed with on-chip PHY | USB 2.0 Full-Speed Host/Device |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 PTP | 10/100 Mbps MAC integrated |
| CAN | 2x CAN-FD controllers | — |
| SERCOM | Up to 8 configurable SERCOM (UART/SPI/I2C) | — |
| ADC | 12-bit, up to 1 Msps | 12-bit, up to 1 MSPS |
| DAC | Dual 12-bit DAC | — |
| GPIO | Up to 84 GPIO | — |
| Cryptography | AES, TRNG, secure boot | — |
| Automotive Qualification | AEC-Q100 (automotive grade) | — |
| RoHS-Status | Compliant | Compliant |
| Moisture Sensitivity Level | MSL 3 | — |
| Core | — | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | — | 120 MHz |
| Montageart | — | Surface Mount |
| Supply Voltage (VDDIO) | — | 1.71 V to 3.6 V |
| Communication Interfaces | — | SERCOM x6 (UART/SPI/I2C), I2S, CAN-FD |
| MSL-Level | — | 3 (168 hours) |
| Special Feature | — | Extended Flash Performance (EFP), Read-While-Write |