ATSAME54N20A-AU-EFP vs ATSAME53N20A-AU-EFP Comparaison
Comparaison détaillée côte à côte de ATSAME54N20A-AU-EFP par Microchip Technology et ATSAME53N20A-AU-EFP par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATSAME54N20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54N20A-AU-EFP ✓ ActifMicrochip Technology
ATSAME53N20A-AU-EFP - 120MHz Cortex-M4F MCU 1MB Flash TQFP-100
ATSAME53N20A-AU-EFP ✓ ActifComparaison des spécifications
| Paramètre | ATSAME54N20A-AU-EFP | ATSAME53N20A-AU-EFP |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,10 | $7,35 |
| Core Architecture | ARM Cortex-M4F with FPU and DSP | 32-bit RISC |
| Maximum CPU Clock | 120 MHz | — |
| Program Memory (Flash) | 1 MB with ECC, dual-panel | 1 MB (1M x 8) with ECC, Dual-Panel |
| SRAM | 256 KB with ECC | 256 KB with ECC |
| Boîtier | 100-pin TQFP (14x14 mm) | 100-pin TQFP, 14x14 mm |
| Operating Voltage (VDDIO) | 1.71 V to 3.6 V | — |
| Température de fonctionnement | -40C to +125C (automotive) | -40C to +85C (industrial) |
| USB | USB 2.0 Full-Speed with on-chip PHY | USB 2.0 Full-Speed Host/Device |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 PTP | 10/100 Mbps MAC integrated |
| CAN | 2x CAN-FD controllers | — |
| SERCOM | Up to 8 configurable SERCOM (UART/SPI/I2C) | — |
| ADC | 12-bit, up to 1 Msps | 12-bit, up to 1 MSPS |
| DAC | Dual 12-bit DAC | — |
| GPIO | Up to 84 GPIO | — |
| Cryptography | AES, TRNG, secure boot | — |
| Automotive Qualification | AEC-Q100 (automotive grade) | — |
| Statut RoHS | Compliant | Compliant |
| Moisture Sensitivity Level | MSL 3 | — |
| Core | — | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | — | 120 MHz |
| Type de montage | — | Surface Mount |
| Supply Voltage (VDDIO) | — | 1.71 V to 3.6 V |
| Communication Interfaces | — | SERCOM x6 (UART/SPI/I2C), I2S, CAN-FD |
| Niveau MSL | — | 3 (168 hours) |
| Special Feature | — | Extended Flash Performance (EFP), Read-While-Write |