BSP452HUMA1 vs BSP452 Vergleich
Detaillierter Direktvergleich von BSP452HUMA1 von Infineon und BSP452 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP452HUMA1 | BSP452 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,78 | $0,78 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (Classic PROFET 12V) |
| Family | Classic PROFET 12V | — |
| Number of Channels | 1 | 1 |
| Switch Type | N-Channel (integrated vertical power FET) | — |
| Betriebsversorgungsspannung | 5 V to 34 V | — |
| Continuous Load Current | 700 mA | — |
| On-State Resistance (RDS(on)) | 0.16 ohm (typical) | — |
| Gehäuse | PG-SOT223-4 (3+Tab) | PG-SOT223-4 (4-pin SOT-223 with tab) |
| Montageart | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overvoltage Protection | Yes (clamp) | — |
| Overtemperature Protection | Yes (shutdown with hysteresis) | — |
| Overload Protection | Yes | — |
| ESD Protection | Yes (input pin) | — |
| Inductive Load Switching | Yes (with negative output clamp) | — |
| Betriebstemperatur | -40 C to +150 C (junction) | — |
| MSL-Level | 1 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | — |
| Technology | — | N-channel vertical power FET with charge pump (Smart SIPMOS) |
| Input Compatibility | — | CMOS compatible logic-level input, ground referenced |
| Nominal Load Current | — | 1.1 A |
| DC Continuous Load Current (DigiKey listing) | — | 700 mA |
| Supply Voltage (Vbb) | — | 60 V max (avalanche rated) |
| On-Resistance (Rds(on)) | — | [DATA_NEEDED: typical Rds(on) in mOhm] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] |
| Diagnostic Feedback | — | Yes (status output) |
| Protection Features | — | Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery |
| ESD Rating (HBM, per datasheet) | — | Tested per MIL-STD-883D Method 3015.7 |
| Load Dump Protection | — | Per ISO 7637-1 and DIN 40839 |
| Lead-Free / RoHS | — | Yes (Infineon standard) |