BSP452HUMA1 vs BSP452 Comparaison
Comparaison détaillée côte à côte de BSP452HUMA1 par Infineon et BSP452 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BSP452HUMA1 | BSP452 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,78 | $0,78 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (Classic PROFET 12V) |
| Family | Classic PROFET 12V | — |
| Number of Channels | 1 | 1 |
| Switch Type | N-Channel (integrated vertical power FET) | — |
| Tension d'alimentation de fonctionnement | 5 V to 34 V | — |
| Continuous Load Current | 700 mA | — |
| On-State Resistance (RDS(on)) | 0.16 ohm (typical) | — |
| Boîtier | PG-SOT223-4 (3+Tab) | PG-SOT223-4 (4-pin SOT-223 with tab) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overvoltage Protection | Yes (clamp) | — |
| Overtemperature Protection | Yes (shutdown with hysteresis) | — |
| Overload Protection | Yes | — |
| ESD Protection | Yes (input pin) | — |
| Inductive Load Switching | Yes (with negative output clamp) | — |
| Température de fonctionnement | -40 C to +150 C (junction) | — |
| Niveau MSL | 1 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | — |
| Technology | — | N-channel vertical power FET with charge pump (Smart SIPMOS) |
| Input Compatibility | — | CMOS compatible logic-level input, ground referenced |
| Nominal Load Current | — | 1.1 A |
| DC Continuous Load Current (DigiKey listing) | — | 700 mA |
| Supply Voltage (Vbb) | — | 60 V max (avalanche rated) |
| On-Resistance (Rds(on)) | — | [DATA_NEEDED: typical Rds(on) in mOhm] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] |
| Diagnostic Feedback | — | Yes (status output) |
| Protection Features | — | Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery |
| ESD Rating (HBM, per datasheet) | — | Tested per MIL-STD-883D Method 3015.7 |
| Load Dump Protection | — | Per ISO 7637-1 and DIN 40839 |
| Lead-Free / RoHS | — | Yes (Infineon standard) |