BSP742RXUMA1 vs BTS3046SDRATMA1 Vergleich
Detaillierter Direktvergleich von BSP742RXUMA1 von Infineon und BTS3046SDRATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP742RXUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,81 | $0,74 |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Topologie | 1:1 N-Channel High-Side Switch | — |
| Operating Voltage Range (Vbb) | 5 V to 34 V | 4.5 V to 42 V |
| Continuous Load Current | 400 mA | — |
| On-Resistance R_DS(on) (typ) | 70 mΩ | — |
| On-Resistance R_DS(on) (max) | [DATA_NEEDED: R_DS(on) max value at 25C] | — |
| Quiescent Current (Iq typ) | 5 µA | — |
| Input Type | CMOS-compatible logic, active-high | — |
| Betriebstemperaturbereich | -40°C to +150°C (TJ) | -40 C to +150 C |
| Gehäuse | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (Automotive Grade) | — |
| Protection Features | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Diagnostic Output | Yes (Status / Fault feedback) | — |
| Inductive Load Switching | Fast demagnetization integrated | — |
| RoHS Compliance | Compliant | — |
| MSL Moisture Sensitivity Level | MSL 2 (per JEDEC J-STD-020) | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Load Type | — | Low-side switch (ground-referenced load) |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |