BSP742RXUMA1 vs BTS3046SDRATMA1 Comparaison
Comparaison détaillée côte à côte de BSP742RXUMA1 par Infineon et BTS3046SDRATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BSP742RXUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,81 | $0,74 |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Topologie | 1:1 N-Channel High-Side Switch | — |
| Operating Voltage Range (Vbb) | 5 V to 34 V | 4.5 V to 42 V |
| Continuous Load Current | 400 mA | — |
| On-Resistance R_DS(on) (typ) | 70 mΩ | — |
| On-Resistance R_DS(on) (max) | [DATA_NEEDED: R_DS(on) max value at 25C] | — |
| Quiescent Current (Iq typ) | 5 µA | — |
| Input Type | CMOS-compatible logic, active-high | — |
| Plage de température de fonctionnement | -40°C to +150°C (TJ) | -40 C to +150 C |
| Boîtier | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (Automotive Grade) | — |
| Protection Features | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Diagnostic Output | Yes (Status / Fault feedback) | — |
| Inductive Load Switching | Fast demagnetization integrated | — |
| RoHS Compliance | Compliant | — |
| MSL Moisture Sensitivity Level | MSL 2 (per JEDEC J-STD-020) | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Load Type | — | Low-side switch (ground-referenced load) |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |