BSP752RXUMA2 vs ITS4140NHUMA1 Vergleich
Detaillierter Direktvergleich von BSP752RXUMA2 von Infineon und ITS4140NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP752RXUMA2 | ITS4140NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,94 | $0,72 |
| Product Type | Smart High-Side Power Switch | — |
| Topologie | High-side, 1:1 N-channel | 1:1 (Input to Output) |
| Continuous Load Current | 1.3 A | — |
| On-State Resistance (RON) | [DATA_NEEDED: typical RON value in ohms at 25C] | — |
| Supply Voltage Range (Vbb) | [DATA_NEEDED: Vbb min/max operating range] | 4.9 V to 60 V |
| Load Dump Protection | Yes (integrated) | — |
| Overload Protection | Yes (current limitation) | Yes |
| Short Circuit Protection | Yes | — |
| Thermisches Abschalten | Yes (with auto-restart) | — |
| Reverse Battery Protection | Yes | — |
| Open-Load Detection (OFF state) | Yes (via external resistor) | — |
| Status Feedback Pin | Yes | — |
| Fast Demagnetization | Yes (for inductive loads) | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | -40 C to +125 C |
| Gehäuse | PG-DSO-8-6 (DSO-8-6) | PG-SOT223-4 (3+Tab) |
| Montageart | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive grade) | — |
| RoHS-Status | Compliant | Compliant |
| Funktion | — | High-Side Power Switch / Load Driver |
| Switch Type | — | N-Channel (vertical, integrated) |
| Output Current (Continuous) | — | 200 mA |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| MSL-Level | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |