BSP752RXUMA2 vs ITS4140NHUMA1 Comparaison
Comparaison détaillée côte à côte de BSP752RXUMA2 par Infineon et ITS4140NHUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BSP752RXUMA2 | ITS4140NHUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,94 | $0,72 |
| Product Type | Smart High-Side Power Switch | — |
| Topologie | High-side, 1:1 N-channel | 1:1 (Input to Output) |
| Continuous Load Current | 1.3 A | — |
| On-State Resistance (RON) | [DATA_NEEDED: typical RON value in ohms at 25C] | — |
| Supply Voltage Range (Vbb) | [DATA_NEEDED: Vbb min/max operating range] | 4.9 V to 60 V |
| Load Dump Protection | Yes (integrated) | — |
| Overload Protection | Yes (current limitation) | Yes |
| Short Circuit Protection | Yes | — |
| Arrêt thermique | Yes (with auto-restart) | — |
| Reverse Battery Protection | Yes | — |
| Open-Load Detection (OFF state) | Yes (via external resistor) | — |
| Status Feedback Pin | Yes | — |
| Fast Demagnetization | Yes (for inductive loads) | — |
| Plage de température de fonctionnement | -40C to +150C (junction) | -40 C to +125 C |
| Boîtier | PG-DSO-8-6 (DSO-8-6) | PG-SOT223-4 (3+Tab) |
| Type de montage | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive grade) | — |
| Statut RoHS | Compliant | Compliant |
| Fonction | — | High-Side Power Switch / Load Driver |
| Switch Type | — | N-Channel (vertical, integrated) |
| Output Current (Continuous) | — | 200 mA |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| Niveau MSL | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |