BSP762TXUMA1 vs BTS428L2ATMA1 Vergleich
Detaillierter Direktvergleich von BSP762TXUMA1 von Infineon und BTS428L2ATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP762TXUMA1 | BTS428L2ATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,74 | $1,45 |
| Product Type | Smart High-Side Power Switch (N-Channel) | Smart High-Side Power Switch |
| Switch Configuration | 1:1 (Single Channel) | — |
| Load Current (Continuous) | 2 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBAT operating range] | — |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: typical Rds(on) in mOhm] | — |
| Number of Channels | 1 | 1 |
| Input Type | Non-Inverting (Logic-Level) | CMOS-compatible, ground-referenced |
| Betriebstemperaturbereich | -40 C to +150 C (junction) | [DATA_NEEDED: min/max] |
| Gehäuse | PG-DSO-8-6 (8-pin SOIC with thermal pad) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature, Overvoltage, Undervoltage Lockout, Load Dump, Reverse Battery | — |
| Integrated Charge Pump | Yes | — |
| Diagnostic Output | Status / Fault Feedback (open-drain) | — |
| Family | MINI-PROFET | — |
| RoHS-Status | Compliant | — |
| MSL-Level | 1 (unlimited floor life) | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Betriebsversorgungsspannung | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |