BSP762TXUMA1 vs BTS428L2ATMA1 Comparación
Comparación detallada lado a lado de BSP762TXUMA1 por Infineon y BTS428L2ATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BSP762TXUMA1 | BTS428L2ATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,74 | $1,45 |
| Product Type | Smart High-Side Power Switch (N-Channel) | Smart High-Side Power Switch |
| Switch Configuration | 1:1 (Single Channel) | — |
| Load Current (Continuous) | 2 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBAT operating range] | — |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: typical Rds(on) in mOhm] | — |
| Number of Channels | 1 | 1 |
| Input Type | Non-Inverting (Logic-Level) | CMOS-compatible, ground-referenced |
| Rango de temperatura de funcionamiento | -40 C to +150 C (junction) | [DATA_NEEDED: min/max] |
| Encapsulado | PG-DSO-8-6 (8-pin SOIC with thermal pad) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature, Overvoltage, Undervoltage Lockout, Load Dump, Reverse Battery | — |
| Integrated Charge Pump | Yes | — |
| Diagnostic Output | Status / Fault Feedback (open-drain) | — |
| Family | MINI-PROFET | — |
| Estado RoHS | Compliant | — |
| Nivel MSL | 1 (unlimited floor life) | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Tensión de alimentación de funcionamiento | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |