BTN8982TAAUMA1 vs BTN9970LVAUMA1 Vergleich
Detaillierter Direktvergleich von BTN8982TAAUMA1 von Infineon und BTN9970LVAUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTN9970LVAUMA1 - Integrated Half-Bridge 9.7mΩ 60A NovalithIC+ | Infineon
BTN9970LVAUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTN8982TAAUMA1 | BTN9970LVAUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,65 | $1,95 |
| Product Type | Half-Bridge Motor Driver (NovalithIC) | Integrated Half-Bridge Motor Driver (NovalithIC+) |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Continuous Load Current | 50 A | — |
| Strombegrenzung | 55 A typical | — |
| High-Side MOSFET | P-channel DMOS | — |
| Low-Side MOSFET | N-channel DMOS | — |
| Integrated Functions | Charge pump, driver IC, protection logic | — |
| On-Resistance (typ) | [DATA_NEEDED: RDS(on) high+low side mΩ] | — |
| Betriebstemperatur | -40 C to +150 C | — |
| Gehäuse | PG-TO263-7-1 (TO-263-7 / D2PAK-7) | PG-HSOF-7-1 (7-pin exposed-pad SMD) |
| Anzahl der Pins | 7 (plus tab) | — |
| Montageart | Surface Mount | Surface Mount |
| Switching Control | PWM with adjustable slew rate | — |
| Protection Features | Current limit, over-temperature, status flag | — |
| Automotive Grade | AEC-Q100 qualified | — |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | P-channel high-side + N-channel low-side half-bridge |
| R_DS(on) (typ) | — | 9.7 mΩ per switch leg |
| Peak Current Detection | — | 60 A |
| Operating Voltage Range | — | [DATA_NEEDED: exact min/max VCC] |
| Load Voltage Tolerance (transient) | — | [DATA_NEEDED: V_load max] |
| PWM Input Logic Level | — | TTL/CMOS-compatible (3.3 V and 5 V) |
| Charge Pump | — | Not required (p-channel high-side) |
| Integrated Protection | — | Overtemperature, overcurrent, undervoltage, short-circuit |
| Current Sense Output | — | Yes (IS pin proportional to load current) |
| Betriebstemperaturbereich | — | [DATA_NEEDED: -40C to +150C typ] |
| Target Motor Voltage | — | 12 V nominal (24 V supported) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| Driver IC Integration | — | Yes (monolithic gate driver + FETs) |