BTN8982TAAUMA1 vs BTN9970LVAUMA1 Comparaison
Comparaison détaillée côte à côte de BTN8982TAAUMA1 par Infineon et BTN9970LVAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTN9970LVAUMA1 - Integrated Half-Bridge 9.7mΩ 60A NovalithIC+ | Infineon
BTN9970LVAUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTN8982TAAUMA1 | BTN9970LVAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,65 | $1,95 |
| Product Type | Half-Bridge Motor Driver (NovalithIC) | Integrated Half-Bridge Motor Driver (NovalithIC+) |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Continuous Load Current | 50 A | — |
| Limitation de courant | 55 A typical | — |
| High-Side MOSFET | P-channel DMOS | — |
| Low-Side MOSFET | N-channel DMOS | — |
| Integrated Functions | Charge pump, driver IC, protection logic | — |
| On-Resistance (typ) | [DATA_NEEDED: RDS(on) high+low side mΩ] | — |
| Température de fonctionnement | -40 C to +150 C | — |
| Boîtier | PG-TO263-7-1 (TO-263-7 / D2PAK-7) | PG-HSOF-7-1 (7-pin exposed-pad SMD) |
| Nombre de broches | 7 (plus tab) | — |
| Type de montage | Surface Mount | Surface Mount |
| Switching Control | PWM with adjustable slew rate | — |
| Protection Features | Current limit, over-temperature, status flag | — |
| Automotive Grade | AEC-Q100 qualified | — |
| Statut RoHS | Compliant | Compliant |
| Topologie | — | P-channel high-side + N-channel low-side half-bridge |
| R_DS(on) (typ) | — | 9.7 mΩ per switch leg |
| Peak Current Detection | — | 60 A |
| Operating Voltage Range | — | [DATA_NEEDED: exact min/max VCC] |
| Load Voltage Tolerance (transient) | — | [DATA_NEEDED: V_load max] |
| PWM Input Logic Level | — | TTL/CMOS-compatible (3.3 V and 5 V) |
| Charge Pump | — | Not required (p-channel high-side) |
| Integrated Protection | — | Overtemperature, overcurrent, undervoltage, short-circuit |
| Current Sense Output | — | Yes (IS pin proportional to load current) |
| Plage de température de fonctionnement | — | [DATA_NEEDED: -40C to +150C typ] |
| Target Motor Voltage | — | 12 V nominal (24 V supported) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Driver IC Integration | — | Yes (monolithic gate driver + FETs) |