BTN9960LVAUMA1 vs BTS3035TFATMA1 Vergleich
Detaillierter Direktvergleich von BTN9960LVAUMA1 von Infineon und BTS3035TFATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTN9960LVAUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,44 | $0,61 |
| Product Type | Integrated Half-Bridge Motor Driver | Low-Side Power Switch |
| Topologie | P-channel high-side + N-channel low-side MOSFET with integrated driver IC | — |
| Path Resistance (typ @ 25C) | 9.7 mOhm | — |
| Overcurrent Detection Threshold | 35 A | — |
| Supply Voltage Range (operating) | 8 V to 18 V | — |
| Supply Voltage Range (max rating) | 40 V | — |
| Logic Input Low Voltage (max) | 1.3 V | — |
| Logic Input High Voltage (min) | 1.6 V | — |
| Turn-On Rise Time (typ) | 2.5 us | — |
| Turn-Off Fall Time (typ) | 250 ns | — |
| Dead Time (typ) | 250 ns | — |
| Standby Current (max) | 3.3 uA | — |
| Propagation Delay (typ) | 3.6 us | — |
| Betriebstemperaturbereich | -40C to +150C | -40C to +150C (junction) |
| Gehäuse | PG-HSOF-7-1 | PG-TO252-3-313 (DPAK) |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Protection Features | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control | — |
| RoHS-Status | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Number of Channels | — | 1 |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| MSL-Level | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Automotive Grade | — | AEC-Q100 qualified |