BTN9960LVAUMA1 vs BTS3035TFATMA1 Comparación
Comparación detallada lado a lado de BTN9960LVAUMA1 por Infineon y BTS3035TFATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTN9960LVAUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Motor Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,44 | $0,61 |
| Product Type | Integrated Half-Bridge Motor Driver | Low-Side Power Switch |
| Topología | P-channel high-side + N-channel low-side MOSFET with integrated driver IC | — |
| Path Resistance (typ @ 25C) | 9.7 mOhm | — |
| Overcurrent Detection Threshold | 35 A | — |
| Supply Voltage Range (operating) | 8 V to 18 V | — |
| Supply Voltage Range (max rating) | 40 V | — |
| Logic Input Low Voltage (max) | 1.3 V | — |
| Logic Input High Voltage (min) | 1.6 V | — |
| Turn-On Rise Time (typ) | 2.5 us | — |
| Turn-Off Fall Time (typ) | 250 ns | — |
| Dead Time (typ) | 250 ns | — |
| Standby Current (max) | 3.3 uA | — |
| Propagation Delay (typ) | 3.6 us | — |
| Rango de temperatura de funcionamiento | -40C to +150C | -40C to +150C (junction) |
| Encapsulado | PG-HSOF-7-1 | PG-TO252-3-313 (DPAK) |
| Tipo de montaje | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Protection Features | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control | — |
| Estado RoHS | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Number of Channels | — | 1 |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Nivel MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Automotive Grade | — | AEC-Q100 qualified |