BTS118DATMA1 vs BTS52004EKAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS118DATMA1 von Infineon und BTS52004EKAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS118DATMA1 | BTS52004EKAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,78 | $1,65 |
| Part Number | BTS118DATMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | Smart SIPMOS Low-Side Power Switch | — |
| Topologie | 1:1 N-Channel Smart Low-Side Switch | High-Side, 1:1 N-Channel MOSFET with charge pump |
| Load Supply Voltage (Vbb max) | 42 V | — |
| Continuous Drain Current | 2.4 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) typical @ 25C] | — |
| Input Logic Level | CMOS / TTL compatible | — |
| Input Protection | ESD protected | — |
| Thermal Protection | Thermal shutdown with auto-restart | — |
| Overload Protection | Yes | — |
| Short-Circuit Protection | Yes | — |
| Overvoltage Protection | Yes (Vbb transient) | — |
| Current Limitation | Yes | — |
| Status Feedback | Open-drain diagnostic output (shared with IN) | — |
| Gehäuse | PG-TO252-3-11 (DPAK) | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40C to +150C (junction) | -40 °C to +150 °C junction |
| RoHS / REACH | Green product, RoHS compliant, lead-free | — |
| MSL-Level | MSL 3 (per JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| Product Type | — | Quad Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| On-Resistance (Ron, typ) | — | 200 mΩ per channel |
| Continuous Load Current per Channel | — | 800 mA |
| Operating Voltage Range (Vbb) | — | 5 V to 38 V |
| Load Dump Tolerance | — | Up to 38 V |
| Standby Current | — | [DATA_NEEDED: typical Ibb(off)] |
| Quiescent Current (active) | — | [DATA_NEEDED: Ibb(on) typ] |
| PWM Frequency (max) | — | 1 kHz |
| Protection Features | — | Short-circuit, overload, overtemperature, overvoltage, open-load detection |
| Diagnostic Output | — | IS pin (proportional load current sense) |
| Technology | — | Infineon Smart6 |
| RoHS-Status | — | Compliant |