BTS118DATMA1 vs BTS52004EKAXUMA1 Comparación
Comparación detallada lado a lado de BTS118DATMA1 por Infineon y BTS52004EKAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS118DATMA1 | BTS52004EKAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,78 | $1,65 |
| Part Number | BTS118DATMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | Smart SIPMOS Low-Side Power Switch | — |
| Topología | 1:1 N-Channel Smart Low-Side Switch | High-Side, 1:1 N-Channel MOSFET with charge pump |
| Load Supply Voltage (Vbb max) | 42 V | — |
| Continuous Drain Current | 2.4 A | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) typical @ 25C] | — |
| Input Logic Level | CMOS / TTL compatible | — |
| Input Protection | ESD protected | — |
| Thermal Protection | Thermal shutdown with auto-restart | — |
| Overload Protection | Yes | — |
| Short-Circuit Protection | Yes | — |
| Overvoltage Protection | Yes (Vbb transient) | — |
| Current Limitation | Yes | — |
| Status Feedback | Open-drain diagnostic output (shared with IN) | — |
| Encapsulado | PG-TO252-3-11 (DPAK) | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40C to +150C (junction) | -40 °C to +150 °C junction |
| RoHS / REACH | Green product, RoHS compliant, lead-free | — |
| Nivel MSL | MSL 3 (per JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| Product Type | — | Quad Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| On-Resistance (Ron, typ) | — | 200 mΩ per channel |
| Continuous Load Current per Channel | — | 800 mA |
| Operating Voltage Range (Vbb) | — | 5 V to 38 V |
| Load Dump Tolerance | — | Up to 38 V |
| Standby Current | — | [DATA_NEEDED: typical Ibb(off)] |
| Quiescent Current (active) | — | [DATA_NEEDED: Ibb(on) typ] |
| PWM Frequency (max) | — | 1 kHz |
| Protection Features | — | Short-circuit, overload, overtemperature, overvoltage, open-load detection |
| Diagnostic Output | — | IS pin (proportional load current sense) |
| Technology | — | Infineon Smart6 |
| Estado RoHS | — | Compliant |