BTS3028SDRATMA1 vs BTG70902EPLXUMA1 Vergleich
Detaillierter Direktvergleich von BTS3028SDRATMA1 von Infineon und BTG70902EPLXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS3028SDRATMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,92 | $0,99 |
| Product Type | Smart Low-Side Power Switch | — |
| Topologie | 1:1 N-Channel, single channel | — |
| Ausgangsstrom (max.) | 5 A | — |
| On-Resistance RDS(ON) | 28 mΩ (typ.) | — |
| Load Voltage (max) | 60 V (load-dump rated) | — |
| Betriebsversorgungsspannung | 5 V to 28 V (typ. 13.5 V) | — |
| Logic Input Voltage (IN) | Logic-level, 3.3 V/5 V compatible | — |
| Gehäuse | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) | PG-TSDSO-14 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 °C to +150 °C (junction) | — |
| Protection Features | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Status Output | Open-drain diagnostic flag | — |
| Automotive Qualification | AEC-Q100 | AEC-Q100 (PROFET+2 family targeted at automotive) |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |
| Product Family | — | PROFET+2 12V |
| Funktion | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Input-to-Output Ratio | — | 1:1 |
| Ausgangskonfiguration | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Strombegrenzung | — | Fixed (value not specified in retrieved data) |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Betriebs-Sperrschichttemperatur | — | -40 C to +150 C |